You want minimum mechanical effort when using your illumination system
Most of the time illumination systems can only be installed at a very short working distance from the test object. This leaves little room for handling making it necessary to position the illumination first. The CCS LDLB allows a larger working distance between illumination and test object leaving enough space for repositioning if necessary.
You have enough space for handling your illumination.
You want to precisely control multiple illumination units in a daisy-chain
If you want to connect multiple CCS LDLB units in a daisy-chain you only need a single trigger for control. All units are controlled by the same signal.
You can easily synchronise multiple units.
You have less programming work as only a single trigger has to be defined.
You want simple cabling
The CCS LDLB can be connected directly with the camera without using an external controller. In addition, when using multiple illumination systems the units are connected via short cable sections. There is only one central connection for the trigger source.
You need less cabling.
Markets & Applications
Automotive: Checking adhesive residues on door panels
Packaging: Checking cardboard in beverage containers
Traceability: Barcode reading on assembly lines for product verification
Shipping: Barcode reading on bottle pallets for completeness check
Length of illumination area: 300 mm
Light colour red: max. 24 W
Light colour white: max. 31 W
Input voltage: 24 VDC
Continuous mode: max. 1.3 A
Overdrive mode: max. 6 A
Manual: Set any of 100 steps via the setting switch.
External: Analog voltage(0 V to +10 V)
The new bar light CCS LDLB has a built-in controller with overdrive capabilities, and it comes in an IP67 configuration.